Rev: 01.15.20
Page 8
CCD-0002221
15.
Place any excess coaxial cable into the area behind the internal prep plate. Secure excess cabling with
strain reliefs.
16.
Place the internal prep plate flush against the wall, taking care to align the plate's two mounting holes
with the previously marked screw locations.
17.
Install two #8 x
3/4”
stainless steel Phillips pan head screws (Fig. 11A) to secure the internal prep plate
to the wall.
A
Fig. 11
A
A
13.
Feed the two cellular antenna coaxial cables through the unit and into the internal prep plate access hole.
14.
Attach each coaxial cable to a coaxial bulkhead connector located on the back of the internal prep
plate (Fig. 10A).
A
Fig. 10
Installed DC Jack Harness not shown for clarity.
