Instructions
Compact disc mower KSM 130
8 - 22
140050-01-EN BA KSM 130 / 04.06.2020
•
Driving behaviour, steering and braking capabilities are affected
by attached units and ballast weights! Ensure sufficient steering
and braking capabilities!
•
Prior to maintenance and repair work on the lifted unit, secure it
by mechanical means using suitable supporting elements! Turn
off the engine and pull the ignition key!
•
Check nuts and screws for tight seat and, if necessary, retighten
them. First check after about 5 operating hours.
•
Spare parts must at least comply with the technical requirements
specified by the manufacturer! This is only guaranteed for
LIPCO
original spare parts!
•
A safe operation of the cutter bar can only be guaranteed if the
blades have been mounted according to regulations. For
mounting, the special tools included in the delivery must be used!
•
Check cutter system before each startup for damaged, missing
and worn-out blades and, if necessary, replace them!
•
Replace missing and damaged blades always in sets, to avoid the
formation of dangerous imbalances!
•
The protection devices must be checked regularly, and worn-out
or damaged protection devices must be replaced!
•
The protective devices on the cutter system, for example cloths
and hoods, protect against flying rocks and the like and protect the
access to dangerous places! This is why they must be put into the
protective position before commencing work!
•
Prior to startup and during work, the sliding blocks must lie on the
ground!
Summary of Contents for KSM 130
Page 22: ...22 22 Design mail bauer ib com...