![background image](http://html1.mh-extra.com/html/lipco/ksm-130/ksm-130_original-instructions-manual_1926993016.webp)
Instructions
Compact disc mower KSM 130
16 - 22
140050-01-EN BA KSM 130 / 04.06.2020
12. Oil change
•
Change the oil in the cutting bar and angular gear after the first 50
operating hours and then every 200 operating hours, but at least
once a year. Change oil while warm but not while hot (risk of
burning!). Use high-grade mineral gear oil SAE 80 or 90.
•
The oil level must be checked every 20 operating hours.
•
The oil temperature can be 80
– 100°C in the angular gear and 40
– 50°C in the cutter bar without causing any damage.
Caution!
There is a risk of burning if the angular gear is
touched!
•
In case of longer downtimes, we recommend depositing the
cutting unit with the cutter bar horizontally in working position, to
allow the cogwheels to become wetted by the oil.
Oil in the cutter bar:
•
The oil charging screw (A) for the cutter bar is located between
the middle cutter discs.
•
Perform oil level check with the cutter bar in exactly horizontal
position.
•
The oil level, as measured in the oil charging hole, should be 12
mm.
•
The drain screw (B) is located at the lower end of the cutter bar
under the first cutter disc.
Fig. 6
A
B
Summary of Contents for KSM 130
Page 22: ...22 22 Design mail bauer ib com...