Attaching the lockon to the track
T
he lockon connects power from your
controller to the track. Attaching the
lockon to the track is quick and easy.
First, place the lockon under any
straight section of track. Fit the
center lip of the lockon onto
the edge of an outside rail.
Press the lockon
upward so that the spring contact snaps
onto the center rail. The lockon
should face outward when set-
ting up your track and
make sure it is
firmly
connected. Use the illustra-
tions below as a step-by-step
guide.
Once the lockon is securely attached to the
track, it’s time to insert the wires from the
controller into the two spring clips on the
lockon. See page 6 for easy-to-follow steps.
2
1
LIONEL
CTC
LO
CKON
Snap spring contact
to the middle rail
2
Hook lip to the
outside of the rail
1
Track layout
5
Summary of Contents for QVC Soo Line Transportation O-27
Page 15: ...Notes 15...
