Track layout
4
Joining the track sections
J
oin the track sections
together by inserting the
pins of one track section into
the rail openings of another.
For good electrical contact,
pins must be carefully inserted
and track joints tightly fitted.
If the track is difficult to
connect, try this installation
tip. You can “break in” O-27
track sections by inserting and
withdrawing a track pin into
one rail at a time before join-
ing the entire track section.
If the openings become too wide (causing
the track to fit loosely), pinch the rail
together around a track pin
with a pair of pliers. If any
pins fall out of the track and
are missing, replace them with
extras available from your
Lionel dealer.
Maintenance tip: The rails
should be kept clean, dry, and
free from oil and grease. Clean
rust and dirt spots with a track
eraser. Wipe the track using a
cloth dampened with track
cleaner from the Lionel main-
tenance kit (no. 6-62927), available from
your nearest Lionel Authorized Value Added
Dealer or Lionel Service.
Suggested track layouts
Here are some examples of layouts you can build with 8 straight and 8 curved sections of
track. Remember—the more track you own, the more variations you can create in your train
layout. And that means more action and more fun!
We recommend that you do not set-up your track layout on carpeted surfaces.
Carpet fibers may collect on your engine’s wheels and drive gears, and prevent your
engine from operating properly. For best results, place track on a hard surface.
Note!
Summary of Contents for QVC Soo Line Transportation O-27
Page 15: ...Notes 15...
