Maintaining and servicing your set
13
Replacing your GP-9’s lamps
Y
our GP-9 locomotive is illuminated by
two 12-volt lamps. One illuminates the
rear lights and the other illuminates the
front lights and cab interior. During the
course of normal operation, they may
require replacement.
Start by separating the plastic body shell
by removing the four body screws located on
the bottom of the frame (see detail on page
12 for location). Carefully lift the shell away
from the frame. Take care with the various
wiring assemblies connected to the shell.
Locate the assembly containing the
expired lamp. It’s held in position by a
retaining clip; carefully remove the lamp
assembly from the retaining clip. Then gen-
tly pull the expired lamp from its socket.
Replace the expired lamp with Lionel part
no. 600-8352-311, available from your local
authorized Lionel Service Center or Lionel
Service. Reinstall the shell.
Remove the expired bulb, then insert the new bulb into the lamp socket.
Lionel part no. 600-8352-311
Summary of Contents for QVC Soo Line Transportation O-27
Page 15: ...Notes 15...
