background image

W

hen you press 

AUX1

on your CAB-1 Remote Controller, you

turn the numeric keypad into ten command buttons. The

keypad lets you control extra command features (until you press any
top-row button like 

SW

,

ACC

,

RTE

,

TR

, or

ENG

). The CAB-1

Remote Controller keypad overlay included with this locomotive set
will help you learn the extra features specific to these units.

RailSounds sound system effects are in bold italic.

CAB-1 Remote Controller numeric keypad commands for your
locomotive set 

TrainMaster Command operations

DIESEL

ENGINE

RESET

VOLUME

SMOKE

RPM

S

SHUT

CREW

TALK

TOWER

COM

DOWN

OFF

ON

START-UP

0

Stops and resets the locomotive set.
Resets the locomotive set’s direction to
FORWARD. Resets the RailSounds
sound system to automatic RPM
operation. 

Horn blows, and the

headlight will flicker. RPMs
return to automatic.

1

Raises the volume of the RailSounds
sound system. 

Sound volume

increases.

2

CrewTalk

communication is the

sound of unintelligible walkie-talkie
communication.

3

Raises the RailSounds sound system
RPM level. Starts-up the RailSounds
sound system. 

RPMs increase.

Start-up sequence commences.

4

Lowers the volume of the RailSounds
sound system. 

Sound volume

decreases.

5

Activates the RailSounds sound system
shutdown sequence. Just like the real
thing, 

your 

locomotive set

’s RPMs

must be at idle for shutdown to
occur. 

Press 

6

repeatedly to lower

RPMs until they won’t descend further.
Your locomotive is now at idle. Press 

5

to initiate the shutdown sequence,

following the CrewTalk
communication sounds. 

CrewTalk

communication sounds, Diesel
shutdown commences.

Remember, the horn, bell, and RPMs
will not sound until you 

restart 

the

RailSounds sound system.

6

Lowers RailSounds sound system
RPM level. 

RPMs decrease.

7

TowerCom

announcements are

audible announcements that include
the engine’s road number and/or
name. Pressing 

7

the first time triggers

a “hold for clearance” announcement.
Press 

7

again, and a “clear for

departure” message plays. 

There is a

four second delay in this function

.

8

Turns smoke off.

Air release sounds.

9

Turns on the smoke generator. Press
and hold 

9

(ten seconds maximum) to

initiate Smoke Boost — this
superheats the smoke generator and
enhances smoke output when you start
running your diesel engine. See notes
on filling or turning off the smoke
generator on page 18. 

Air release

sounds.

AUX1

8

and 

9

work only if the smoke unit switch is in the ON position.

Note!

13

Summary of Contents for ALCo PA A-A Diesel Locomotive Set

























Reviews:

Related manuals for ALCo PA A-A Diesel Locomotive Set