O
REGON
S
TATE
P
OLICE
I
MPLIED
C
ONSENT
P
ROGRAM
I
NTOXILYZER
®
8000
O
PERATOR
’
S
G
UIDE
2.0
S
TEP
O
NE
–
P
REPARING TO
C
ONDUCT A
T
EST
Originally
Adopted:
07/13/2006
Revision #:
1.1
Revision Effective Date: 09/08/2006
name, middle name or initial), however,
the operator name field is not required and no data need be
entered for the instrument to proceed through the testing sequence
. Information entered into the
instrument will be printed on the Test Report in WYSIWYG (What You See Is What You Get) format.
The operator must confirm the information entered by pressing the “Enter” key on the instrument’s
keyboard. The instrument will then proceed to the
“Enter Operator PIN”
message.
Entering an Operator PIN
Upon successfully scanning an operator permit or the manual entry of a valid permit number and
operator name, the instrument will proceed to the
“Enter Operator PIN”
message. The operator
should enter his or her Personal Identification Number (PIN) and confirm the information by pressing
the “Enter” key on the instrument’s keyboard:
Enter Operator PIN
Enter Operator PIN
····
As the operator enters his or her PIN information on the keyboard, an asterisk (“*”) character will be
displayed on the second line of the instrument’s display. The instrument will validate the information
provided by the operator and acknowledge that a valid PIN has been entered by proceeding to the
“Scan Subject License or Press Enter”
message. If an operator does not enter his/her correct PIN,
the instrument will abort the testing sequence after three (3) unsuccessful attempts are made by the
operator. If a PIN is not successfully entered, or no PIN is entered, the instrument will return to the
“Ready to Start”
message after approximately 60 seconds have elapsed.
Scanning a Driver’s License
When the instrument displays the
“Scan Subject License or Press Enter”
message, the operator
may use the instrument’s internal bar code scanner to read the bar code printed on a driver’s license.
Scan Subject License
or Press Enter
The card should be held perpendicular to the face of the instrument directly above the keyboard. The
card should be kept as flat as possible and held still until the instrument reads the bar code printed on
the card. The operator will have approximately 30 seconds within which to complete the scanning
process or the instrument will default to manual entry and display the
“Enter Subject Name (L, F,
M)”
message. The instrument will acknowledge that a successful scan of the subject’s license was
ALL PRINTED COPIES ARE UNCONTROLLED AND MAY NOT BE COMPLETE
Page 11 of 54
