1
Introduction
Thank you for choosing the product of Jiangsu Linyang Photovoltaic Technology Co., Ltd
(“Linyang Photovoltaic”). This installation manual applies to the operation and maintenance of
bifacial modules manufactured by Linyang Photovoltaic.
Linyang Photovoltaic modules have passed testing by international testing and certification
organizations. Please feel relaxed in using our products as long as you observe the terms and
conditions defined in this installation manual.
Please carefully read this Manual before operating and installing the module. This manual
covers the basic information on mechanical and electric installation and vital safety information,
which you must understand.
A “module” or “solar PV module” herein means one or several series solar modules. Please
retain this Manual for possible future use.
This manual applies exclusively to solar PV modules manufactured by Linyang Photovoltaic.
2
Disclaimer
Linyang Photovoltaic reserves the right to modify this installation manual without any prior
notice. Linyang Photovoltaic holds no liability for any damage or hurt whatsoever, including but not
limited to any personal injury, hurt or property arising from any module operation, system
installation or compliance or non-compliance with any instruction herein.
A client’s failure in observing instructions listed herein during any module installation will
result in expiry of the limited warranty of product provided to the client.
3
General
Linyang Photovoltaic designs its module according to IEC61730-1, conforming to the standard
for Application Class A.
A module conforming to Application Class A means that, the module may be used in systems
operating at greater than 50V DC or 240W where general contact access is anticipated. (If such an
application module passes IEC61730-1 and IEC61730-2, it shall be regarded as conforming to Class
II safety requirements.
All installation work must comply with the local codes and the relevant international electrical
standards.
The installation, operation and maintenance of module require high-level technical capacities
and experience, thus requiring qualified engineers with such skills and relevant basic electrical,
electronic and mechanical knowledge to implement.
