4 Cautions
An improper operation may result in injury or death; the installation and commissioning of
solar PV system require specialized skills and knowledge. The installer shall, prior to the
installation, read and understand any and all safety measures described herein.
The following safety instructions and warnings are important integral parts of this Manual, as a
guidance. For any question, please contact our Customer Service for further help.
a)
When a module is exposed to sunlight or any other light source, direct current is generated
inside the module, when contact with any electrical part of module may result in electric
shock.
b)
Do not focus sunlight with a mirror or lens to shine on the solar PV module.
c)
The front glass and back glass of solar PV module protect the module. A damaged solar
PV module is with electric hazard (electric shock and fire); such a module can not be
restored or repaired and shall be immediately replaced.
d)
Under normal outdoor conditions, the current and voltage generated from the module are
somehow different from those listed in the parameter list. The parameter list is based on
testing under standard testing conditions. Therefore, when determining the parameters of
other components in the PV generation system related to the module power output, such as
rated voltage, conductor capacity, fuse capacity and controller capacity, design and install
such components based on 125% of the values of short-circuit current and open-circuit
voltage labeled on the module.
e)
To reduce hazards of electric shock or combustion, opaque materials may be applied to
cover the module surface when installing a solar PV module.
f)
The installation of a module array shall be conducted with devices to isolate sunlight;
module installation and/or maintenance shall be conducted by qualified professionals only.
g)
If any accumulator is used in the PV system, its configuration with the module shall be
subject to the guidance of accumulator manufacturer.
h)
No module shall be installed in any area with possible inflammable gas.
i)
Strictly do not touch any electrical part of module directly with hand; use insulating tools
for electrical connections.
j)
Do not dismantle any part or component in a solar PV module provided by Linyang
Photovoltaic without permission.
k)
Read and understand all installation guidance before install, wire or maintain a module.
l)
Do not lift a module through lifting a junction box or connection line.
m)
All module systems shall be grounded; unless otherwise required, please observe IEC
norms or any other international norm or standard.
