Linx 7900 Quick Start Manual Download | Manualshive

Page: 57 / 81

background image

Chapter 6: Look after your printer

Linx 5900 & 7900 Quick Start Guide

44

FA69315–3 English

6.1 Clean the printer

WARNING: HAZARDOUS SUBSTANCES. MANY OF THE INKS USED
WITH THIS PRINTER ARE SOLVENT-BASED AND CAN BE
HAZARDOUS. THEY ARE HIGHLY FLAMMABLE, AND THE VAPOUR
OR SPRAY CAN BE IRRITATING TO THE EYES AND RESPIRATORY
SYSTEM.
YOU MUST WEAR SAFETY GLASSES AND SOLVENT-RESISTANT
PROTECTIVE GLOVES WHEN YOU HANDLE INKS AND SOLVENTS,
WHEN YOU WORK ON THE PRINTER, AND WHEN YOU CLEAN IT.
IF YOU IGNORE THIS SAFETY WARNING, YOU COULD EXPERIENCE
SEVERE IRRITATION AND TEMPORARY (REVERSIBLE) DAMAGE
TO THE EYES, AND NON-ALLERGIC CONTACT DERMATITIS..

WARNING: FLAMMABLE LIQUIDS. THE INKS AND SOLVENTS USED
WITH THIS PRINTER ARE HIGHLY FLAMMABLE.

KEEP INKS AND SOLVENTS AWAY FROM SOURCES OF IGNITION.
DO NOT SMOKE OR USE OPEN FLAMES NEAR THE PRINTER, OR
INK AND SOLVENT STORAGE CONTAINERS. USE INKS AND
SOLVENTS, AND OPERATE THE PRINTER, IN AN AREA WITH GOOD
VENTILATION.

THERE IS A RISK OF FIRE OR EXPLOSION IF THIS SAFETY
WARNING IS IGNORED.

6.1.1 Printer cover

Use a clean, soft, lint-free cloth and the same solvent type that is used in
the printer to clean ink spills from the printer cover.
Use the minimum of solvent. Observe the safety precautions when you
handle the solvent.
Do not use abrasive materials, which damage the equipment.
Use a lint-free cloth to prevent any contamination of the printhead.

«
...
55
56
57
58
59
...
»

Summary of Contents for 7900


















































































Reviews:

No comments

Related manuals for 7900

Brand: S&C Pages: 40

Brand: GARDTEC Pages: 48

Brand: FAAC Pages: 64

Brand: Datavideo Pages: 8

Brand: Eaton Pages: 2

Brand: Eaton Pages: 2

PowerXL DX-NET-ETHERCAT-2

Brand: Eaton Pages: 3

Brand: Fantech Pages: 2

Brand: Kamstrup Pages: 36

Brand: JFA Electronicos Pages: 29

Brand: Quinny Pages: 29

Brand: Quinny Pages: 60

Brand: Taco Electronic Solutions Pages: 28

Brand: Xilinx Pages: 2

Brand: Parker Pages: 54

Brand: RAM Pages: 71

Brand: PUTCO Pages: 2

ZITON RADIO LOOP MODULE

Brand: EMS Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands