EN
135
USE OF PRODUCT
10. USE OF PRODUCT
10.1 Usage of 5 Speed Digital Control
Remove protective folio on the inox product after installation.
Speed Selection The product has 5 speeds of ventilation level.
One of 1,2,3,4,5 speeds is selected in accordance with steam
of cooking or fry. Motor is started pressing
control button
on the front panel. Speed is increased pressing button, and
decreased by pressing button. Automatic timer (TIMER) is
available at the models with electronic remote control. When you
press
button more than 2 seconds, timer function will be on for
15 minutes. When the timer is on, Display will signal and the motor
will be o
ff
automatically 15 minutes later. Please use the cooker
and the product at the same time to enable circulation. Doing so,
air suction power will be a
ff
ected positively. We recommend you
to operate your product for few minutes more after the cooking is
completed to enable absorption rest of smell and steam.
Illumination
The product has 2 lamps and one lamp button to operate
illumination. Press lamp button in order to start illumination.
When you push the lightening button for 4 seconds, led
illumination will be appeared on, also when you push the same
button for 4 seconds led illumination will be closed down.
Cleaning Periods of the Aluminum Filters:
Filters should be cleaned when C signal appears on Display
or (according to usage) each 2-3 weeks. In order to remove C
signal, after the
fi
lters are cleaned and replaced to their place,
press
button more than 3 seconds (when the product is at o
ff
position). Letter “E” will appear on Display and the product will
operate as normal. If you would like to continue using the product
without deleting C signal, when you press the
button active
speed will appear for 1 second, then C signal will appear once
more and the motor will continue operating.
NOTE: C signal will appear after usage of the product for 60
hours.
