![background image](http://html1.mh-extra.com/html/linn/sneaky-music-ds/sneaky-music-ds_setup-and-users-manual_1925559027.webp)
7
TECHNICAL SPECIFICATIONS
w w w. l i n n . c o . u k
SNEAKY MUSIC DS
INSTALLATION AND SETUP
Date of introduction
March 2008
Type
Network music player
Supported file types
WAV, FLAC, MP3, AIFF
Audio sample rates
7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k,
24 k, 29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k,
176.4 k, 192 k
Word depths
16 – 24 bits
Ethernet interface
100Base-T RJ45
Control protocol
Compatible with UPnP
™
media servers,
UPnP
™
AV 1.0 control points
Local control
RS232 x 2 RJ11
Connector types
optical digital output
coaxial digital output
line outputs
speaker outputs
TOSLINK
RCA phono
RCA phono
Inverted safety 4 mm BFA Sockets
Output impedance
line outputs
speaker outputs
300 Ω
0.06 Ω
Output voltage
line outputs
speaker outputs
2.8 V peak, 2 V rms (0 dBFS)
15 V peak, 10 V rms (0 dBFS, 16.6 dB gain,
vol. 79)
Output offset
line outputs
speaker outputs
< 2 mV
< 3 mV
2 4
Signal-to-noise ratio
line outputs
Better than -120 dB
Channel balance
Better than +/- 0.2 dB
Channel separation
line outputs
speaker outputs
Better than -120 dB
Better than -100 dB
Gain range
-80 dB to +20 dB
Gain resolution
1 dB
Unity gain volume
0 dB = volume 80
Dynamic range
120 dB
Damping factor
67
Signal level for clipping
415 mV rms (0 dBFS, +16.6 dB gain, vol. 79)
Harmonic distortion
< 0.03% at 1 kHz at 10 W
Load tolerance
Unconditionally stable into all loudspeaker loads
Frequency response
– pre
– power
2.5 Hz – 170 kHz (-3 dB)
2.5 Hz – 48 kHz (-3 dB)
Speaker output voltage
15 V peak
Speaker output power
20 W into 4 Ω
Power consumption
standby
operational
maximum continuous
10 W
14 W
120 W
Mains supply voltage
(auto-ranging)
100 – 120 V ac (±10%) 50 – 60 Hz
200 – 240 V ac (±10%) 50 – 60 Hz