Linn Majik-I, Owner'S Manual

Page: 32 / 36

TECHNICAL SPECIFICATIONS
Connector types
Headphone
Aux input
Line outputs
Tape outputs
Line inputs
Speaker outputs 3.5 mm jack
¨
RCA Phono
¨
¨
4mm Banana / Binding Post
Input impedance
MM phono input
Line inputs
Aux input 48 kΩ 68 pF
10 kΩ
100 kΩ
Input voltage
MM phono input
Line inputs
Aux input 70 mV peak @ 1cm/sec 1kHz
8.5 V peak, 6 V rms
4.5 V peak, 3.1 V rms
Phono stage gain
MM phono input +40 dB (x 100) @ 1 kHz
Output impedance
Line out
Tape out
Headphones 300 Ω
300 Ω
11 Ω
Output voltage
Line outputs
Tape outputs
Headphones 8.8 V peak, 6 V rms
8.8 V peak, 6 V rms
8.8 V peak, 6 V rms
Output offset
Line outputs
Tape outputs
Headphones
Speaker outputs < 2 mV
< 2 mV
< 2 mV
< 3 mV
Signal-to-noise ratio
Line inputs
MM phono input Better than -120 dB
Better than -90 dB
Channel balance Better than +/- 0.2 dB
Channel separation
Line inputs
MM phono input Better than -106 dB
Better than -90 dB
Gain range -80 dB - +20 dB
Gain resolution 0.5 dB
Unity gain volume 0 dB = volume 80
Dynamic range 120 dB
Damping factor Greater than 170
Signal level for clipping 755 mV rms
Harmonic distortion < 0.01%
Load tolerance Unconditionally stable into all loudspeaker loads
Frequency response
Pre-amp
Power-amp
2.5 Hz – 170 kHz (-3 dB)
2.5 Hz – 48 kHz (-3 dB)
Speaker output voltage 28.8 V peak
Power consumption
Standby
Operational
Maximum continuous
20 W
30 W
300 W
Mains supply voltage
(auto-ranging)
100 – 120 V ac (±10%) 50 – 60 Hz
220 – 240 V ac (±10%) 50 – 60 Hz
MAJIK-I
24