Linn Majik-I, Owner'S Manual

Page: 20 / 36

Standby
When connected to the mains supply your Majik-I will take approximately eight
seconds to configure itself. During this time three dots will be shown on the display
and the unit will ignore front panel and handset commands. After the Majik-I has
completed this process it will enter standby mode and the display will show the
standby symbol .
To toggle between standby mode and operating mode:
• Press on the handset or front panel.
Notes:
Any of the front panel keys will also bring the unit out of standby.
Standby mode reduces the power used by the unit and is useful for situations
where the unit is not being used for a short time and/or requires to be switched
on remotely. For longer periods of non-use, switching off at the mains (using the
mains switch at the rear or unplugging) is recommended.
MAJIK-I
12