Unit configuration
Option
Settings
Description
Default setting
Selection Timeout
1 – 10 seconds
Allows you to adjust the time taken for source selection to take effect. A delay allows you time to scroll through and view
available sources.
1 second
Startup Source
None
Last used
AUX
PHONO
Input 5
Input 4
Input 3
Input 2
Majik CD
Allows you to set which source input will be selected when the unit comes out of standby.
Note:
The names shown are configured in the Source Configuration options.
Last used
Standby Record From
None
Last used
AUX
PHONO
Input 5
Input 4
Input 3
Input 2
Majik CD
Allows you to set a source to be output at TAPE OUT while the unit is in standby.
Last used
Handset Commands
Enabled
Disabled
If set to ‘Enabled’, the unit will accept remote commands from the handset.
If set to ‘Disabled’, the unit will not accept remote commands from the handset. (Setup menus will only be accessible and
adjustable via the front panel controls.)
Enabled
RS232 Configuration
N/A
This option accesses the RS232 setup sub-menu – used to configure the unit to communicate with other RS232 enabled
products.
N/A
Defaults
N/A
This option accesses the defaults sub-menu – used for saving and recalling configurations.
N/A
Unit Information
N/A
Not adjustable – for information only. Allows the unit’s software/hardware revisions to be viewed. This category is mainly
intended for Linn personnel and Linn-appointed service agents.
N/A
MAJIK-I
20
Summary of Contents for Majik-I
