Connecting a line-level source product
Connecting a turntable
6
MAJIK-I
Notes:
LINE INPUT 6 / PHONO may need to be reconfigured if connected to a line-level
source product (this adjustment must be done by an authorised Linn retailer).
See
Important information – phono input
, page 4.
Input names, as they appear on the front panel display, can be customised for
your convenience. See
Setup Menus
, page 16.
FROM SOURCE PRODUCT TO
ANY AVAILABLE LINE INPUT
Important notes:
LINE INPUT 6 / PHONO may need to be reconfigured if connected to a turntable
which is fitted with an MC cartridge (this adjustment must be done by an
authorised Linn retailer). See
Important information – phono input
, page 4.
If an earthing lead is fitted to the tonearm cable, best results are usually achieved
by connecting it to the EARTH GROUND terminal.
If, however, its connection introduces noise (hum etc.) or a reduction in sound
quality, then disconnect it: certain tonearms/cartridges function better with no
earth connection.
Input names, as they appear on the front panel display, can be customised for
your convenience. See
Setup Menus
, page 16.
FROM TURNTABLE
CONNECT EARTH
LEAD IF FITTED
L
R
L
R
Summary of Contents for Majik-I
