18
English
S
etup M
enus
accept an S-video, RGB or YPrPb/YUV signal, set to COMPOSITE.
NOTE:
The RGB option is not available on the US version of the unit.
SPEAKER SETUP
FRONT
Choose the option that best suits the speakers in your
system:
Large front speakers (full-range frequency response) -
set to LARGE
Small front speakers (limited bass response) - set to
SMALL
NOTE:
The setting you choose for your front speakers
determines the options available for other
speakers.
CENTRE
Choose the option that best suits the speaker in
your system:
Large centre speaker (full-range frequency response) -
set to LARGE
Small centre speaker (limited bass response) - set to
SMALL
No centre speaker - set to OFF
REAR
Choose the option that best suits the speakers in your
system:
Large rear speakers (full-range frequency response) -
set to LARGE
Small rear speakers (limited bass response) - set to
SMALL
No rear speakers - set to OFF
18
S
etup M
enus
TEST TONE
When set to ON, a tone signal is sent to all speakers
(except a subwoofer) starting with the front left and
moving in a clockwise direction. The front panel
display shows all possible speakers with the
highlighted speaker indicating the current position of
the tone.
The test tone has two functions:
1. Testing speaker connections
If a speaker has not been connected correctly, the tone will either not be heard or
will jump to a speaker out of the clockwise sequence (meaning a speaker has been
connected to the wrong outputs on the CLASSIK Movie System Di). This feature is not
available for the subwoofer.
2. Speaker volume trim
This feature can be used to ensure the volume level that reaches your seating
position is the same for each speaker (for subwoofer adjustment see Subwoofer trim
in Preamplifier chapter).
To perform speaker volume trim:
●
Set TEST TONE to ON. The test tone display appears on the CLASSIK Movie System
Di’s front panel.
●
Wait for the test tone to reach the speaker you wish to adjust.
●
Repeatedly press or hold
/
on the handset to trim the volume as
required.* Volume trim range is -10 to +10, with neutral trim being 0.
A few seconds after the
/
key has been released, the test tone will continue its
clockwise direction.
* You can do this by ear or by using a Sound Pressure Level meter.
Video Source Setup
The following menus allow you to determine the video signal (Composite, S-video etc)
output by the CLASSIK Movie System Di for various audio sources. This is useful if, for
example, you wanted to listen to a concert on the tuner source which is simultaneously
being broadcast on TV. In this case you may want to set TUNER VIDEO to OFF as this
would stop the CLASSIK Movie System Di from outputting a video signal. As another
example, if you had a set-top box’s S-video output connected to the CLASSIK Movie
System Di’s S VIDEO IN, and the set-top box’s digital optical output connected to the
CLASSIK Movie System Di’s DIG 1 input, you would want to set DIG 1 VIDEO to S-VIDEO IN.
AUX 1 VIDEO and AUX 2 VIDEO
OFF - When either the AUX 1 or AUX 2 source is
selected, no video signal is routed through the
CLASSIK Movie System Di.
INTERNAL - When either the AUX 1 or AUX 2 source
is selected, the internal video signal (the Linn name
screen) is output by the CLASSIK Movie System Di.
COMPOSITE IN - European version: When either the AUX 1 or AUX 2 source is selected,
any video source connected to the CLASSIK Movie System Di’s VCR SCART will be routed
to the unit’s TV SCART. US version: When either the AUX 1 or AUX 2 source is selected,
any video source connected to the CLASSIK Movie System Di’s CVBS IN will be routed to
the unit’s CVBS OUT.
S-VIDEO IN - European and US versions: When either the AUX 1 or AUX 2 source is
selected, any video source connected to the CLASSIK Movie System Di’s S-video input
will be routed to the unit’s S-video output. European version only: When either the AUX
1 or AUX 2 source is selected, any video source connected to the CLASSIK Movie System
Di’s VCR SCART will be routed to the unit’s TV SCART.
RGB / YPrPb IN - European version: When either the AUX 1 or AUX 2 source is selected,
any video source connected to the CLASSIK Movie System Di’s VCR SCART will be routed
to the unit’s TV SCART. US version: When either the AUX 1 or AUX 2 source is selected,
any video source connected to the CLASSIK Movie System Di’s YPrPb inputs will be
routed to the unit’s YPrPb outputs.
English
Summary of Contents for Classik movie Di
Page 1: ...English Fran ais Deutsch Italiano...
Page 2: ......