13
English
V
ideo Output / S
etup M
enus
Video Output
The output video signal that is correct for your TV can be selected using the FORMAT
key on the front panel.
To do this:
●
Repeatedly press or hold /SOURCE – on the front panel until the
display shows LISTEN DISC / RECORD OFF.
●
Repeatedly press FORMAT to select the required format (either PAL, NTSC or
MULTI if your TV accepts both PAL and NTSC).
●
With the required format showing on the front panel display, press and hold
FORMAT until the display changes to show one of the video signal types (either S
VIDEO, COMPOSITE, YPrPb, or RGB*).
●
Repeatedly press FORMAT until the required video signal type is shown on the
display.
●
Wait a few seconds for the display to change to the LISTEN DISC / RECORD OFF
display.
*RGB is not available on the US version of the CLASSIK Movie System Di.
'enter'
'enter'
SETUP
SETUP
Setup Menus
About the setup menus
The on-screen setup menus enable you to configure your CLASSIK Movie System Di to
suit the number and size of your speakers, the picture format of your TV and much
more. It is essential that you use the setup menus to inform the CLASSIK Movie System
Di about components that it is connected to. Please take the time to configure your
CLASSIK Movie System Di correctly.
The menus are divided into five categories:
GENERAL SETUP
For adjusting the general audio and video setup of the CLASSIK Movie System Di.
SPEAKER SETUP
For configuring the CLASSIK Movie System Di to the number, size and position of your
speakers.
VIDEO SOURCE SETUP
For configuring the video output of the CLASSIK Movie System Di.
AUDIO SETUP
For configuring the audio output of the CLASSIK Movie System Di
PREFERENCES
For setting up additional features such as subtitles and parental control. (This category
cannot be accessed if there is a disc playing in the unit.)
Keys used
SOURCE –/
FORMAT
V
ideo Output / S
etup M
enus
English
13
Video Output
The output video signal that is correct for your TV can be selected using the FORMAT
key on the front panel.
To do this:
●
Repeatedly press or hold /SOURCE – on the front panel until the
display shows LISTEN DISC / RECORD OFF.
●
Repeatedly press FORMAT to select the required format (either PAL, NTSC or
MULTI if your TV accepts both PAL and NTSC).
●
With the required format showing on the front panel display, press and hold
FORMAT until the display changes to show one of the video signal types
(either S VIDEO, COMPOSITE, YPrPb, or RGB*).
●
Repeatedly press FORMAT until the required video signal type is shown on the
display.
●
Wait a few seconds for the display to change to the LISTEN DISC / RECORD OFF
display.
*RGB is not available on the US version of the CLASSIK Movie System Di.
Setup Menus
About the setup menus
The on-screen setup menus enable you to configure your CLASSIK Movie System Di to
suit the number and size of your speakers, the picture format of your TV and much
more. It is essential that you use the setup menus to inform the unit about components
that it is connected to. Please take the time to configure your CLASSIK Movie System Di
correctly.
The menus are divided into five categories:
GENERAL SETUP
For adjusting the general audio and video setup of the unit.
SPEAKER SETUP
For configuring the unit to the number, size and position of your speakers.
VIDEO SOURCE SETUP
For configuring the video output of the unit.
AUDIO SETUP
For configuring the audio output of the unit.
PREFERENCES
For setting up additional features such as subtitles and parental control.
(This category cannot be accessed if there is a disc playing in the unit.)
SOURCE –/
FORMAT
Summary of Contents for Classik movie Di
Page 1: ...English Fran ais Deutsch Italiano...
Page 2: ......