LinMot 0150-1299, Installation Manual

Page: 32 / 40

Installation Guide Linear Motors ENG
Page 32 / 40 P01-48 EX protected NTI AG / LinMot
PS01-48x360F-EX-E-FC (0150-1300)
/ Phase1- Red / Pink Pin A / Pin B
1.5

/ Phase2- Blue / Grey Pin C / Pin D
1.5

5V / GND White / Inner shield Pin 1 / Pin 2
155

Sensor Sine / GND Yellow / Inner shield Pin 3 / Pin 2
33 k

Sensor Cosine / GND Green / Inner shield Pin 4 / Pin 2
33 k

Temp. Sensor / GND Black / Inner shield Pin 5 / Pin 2
10 k

Phase / GND - Pin 1 - 4 / Pin 2
> 20 M

All Pin / Shield - Pin A - 10 / Housing
> 20 M

Kty 1 - Pin 7, 8
580

@ 20 °C
Kty 2 - Pin 9, 10
580

@ 20 °C
7 Storage, transport, installation height
•
Sliders are to be stored and transported only in the plastic containers (with cardboard inlay) provided for
this purpose, or already installed and secured in LinMot P stators.
•
Remove the slider from this plastic containers only for assembling.
•
The storage area must be dry, dust-free, frost-free and vibration-free.
•
Maximum relative humidity: 60 %.
•
Prescribed storage temperature: -
15 °C…70 °C
•
The motor must be protected against extreme weather conditions.
•
The air in the storage area must not contain any harmful gases.