LinMot 0150-1299, Installation Manual

Page: 22 / 40

Installation Guide Linear Motors ENG
Page 22 / 40 P01-48 EX protected NTI AG / LinMot
4.2 Mounting the motor
Please attend to the safety instructions in the chapter 2 during the assembling!
1. Installing the external bearing (front).
Pos .1: Hexagon head screw M6 x 35
(Torque = 6 Nm)
Pos. 2: Wiper
Pos. 3: Bearing ring (PB01) or Bearing flange
(PB03)
Pos. 4: Sleeve for bearing
2. Installing the external bearing (rear).
The corresponding bearings must be
ordered separately! A selection can be
found in section 3.2.
Nut
3. Insert the slider into the stator.
After installation, the notch of the slider is
located on the connector side.
The slider is magnetically attracted.