Installation Guide Linear Rotary Motors
ENG
NTI AG / LinMot
PR01-52
Page 29 / 48
7.8.3 Direction of Force MagSpring Kit
The direction of force changes depending on the installation direction of the MagSpring slider. This means
that the MagSpring can pull or push out the motor shaft. The direction of force for the pre-assembled
MagSpring can be selected using the part numbers listed below.
Ordering information
Item
Description
Item-No.
MagSpring push
Linear-Rotary Motor MagSpring force direction: push
0140-0005
MagSpring pull
Linear-Rotary Motor MagSpring force direction: pull (default)
0140-0006
Do not drive into the internal mechanical stops!
Basically, it must be ensured that the linear motor does not move to the lower or upper
internal stop during operation under any circumstances. In particular, when using a
MagSpring, it must be ensured that the MagSpring does not 'fling' the rotary axis into the
internal mechanical stops under any circumstances. A mechanical stop ring, for example,
mounted on the linear rotary shaft, can prevent this.
Pull movement MagSpring
Push movement MagSpring
