13
Advanced Configuration
Linksys X1000
Wi-Fi Protected Setup
Three methods of Wi-Fi Protected Setup are available . Use the method that
applies to the client device you are configuring .
NOTE
Wi-Fi Protected Setup configures one client device at a time .
Repeat the instructions for each client device that supports Wi-Fi
Protected Setup .
Wi-Fi Protected Setup light activity
•
The Cisco logo on the top panel of the router functions as the Wi-Fi
Protected Setup light .
•
When the Wi-Fi Protected Setup process is active, the light flashes slowly .
When the Wi-Fi Protected Setup is successful, the light is continuously lit .
•
If there is an error, the light flashes quickly for two minutes; please wait
and try again .
•
Wait until the light is continuously lit, before starting the next Wi-Fi
Protected Setup session .
•
Wi-Fi Protected Setup Button
Use this method if your client device has a
Wi-Fi Protected Setup button .
NOTE
Make sure you configure one client device at a time .
a.
Click or press the
Wi-Fi Protected Setup
button on the client device .
b.
Click the
Wi-Fi Protected Setup
button on the router’s
Wi-Fi Protected
Setup
screen, OR press and hold the Wi-Fi Protected Setup button on
the back panel of the router for one second .
c.
After the client device has been configured, click
OK
on the
router’s
Wi-Fi Protected Setup
screen within two minutes .
•
Enter Client Device PIN on Router
Use this method if your client device
has a Wi-Fi Protected Setup PIN (Personal Identification Number) .
a.
Enter the PIN from the client device in the
field on the router’s
Wi-Fi
Protected Setup
screen .
b.
Click the
Register
button on the
router’s
Wi-Fi Protected Setup
screen .
c.
After the client device has been configured, click
OK
on the router’s
Wi-Fi Protected Setup
screen within two minutes .
