Linksys WRTH54GS User Manual Download Page 92

Page: 92 / 104

Appendix F: Glossary

Wireless-G High-Speed Router with SpeedBooster

Appendix F: Glossary

802.11b

- A wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an

operating frequency of 2.4GHz.

802.11g

- A wireless networking standard that specifies a maximum data transfer rate of 54Mbps, an operating

frequency of 2.4GHz, and backward compatibility with 802.11b devices.

Access Point

- A device that allows wireless-equipped computers and other devices to communicate with a

wired network. Also used to expand the range of a wireless network.

Adapter

- A device that adds network functionality to your PC.

Ad-hoc

- A group of wireless devices communicating directly with each other (peer-to-peer) without the use of

an access point.

AES

(

dvanced

ncryption

tandard) - A security method that uses symmetric 128-bit block data encryption.

Backbone

- The part of a network that connects most of the systems and networks together, and handles the

most data.

Bandwidth

- The transmission capacity of a given device or network.

Beacon Interval

- Data transmitted on your wireless network that keeps the network synchronized.

Bit

- A binary digit.

Boot

- To start a device and cause it to start executing instructions.

Bridge

- A device that connects different networks.

Broadband

- An always-on, fast Internet connection.

Browser

- An application program that provides a way to look at and interact with all the information on the

World Wide Web.

Buffer

- A shared or assigned memory area that is used to support and coordinate different computing and

networking activities so one isn't held up by the other.

Byte

- A unit of data that is usually eight bits long

Summary of Contents for WRTH54GS









































































































Search results

Summary of Contents for WRTH54GS

Reviews:

Related manuals for WRTH54GS

Brands by name

Popular brands

Linksys WRTH54GS, User Manual

Search results

Summary of Contents for WRTH54GS

Reviews:

Related manuals for WRTH54GS

Brands by name

Popular brands