background image

1

Chapter 1: Introduction
Welcome

Wireless-G Business PCI Adapter with RangeBooster

Chapter 1: Introduction

Welcome

Thank you for choosing the Wireless-G Business PCI Adapter. Setting up your network and your Wireless-G 
Business PCI Adapter is easier than ever.

The Wireless-G PCI Adapter is the simple way to add or upgrade wireless connectivity in your computer.  Just 
install it into your computer's PCI Card slot and enjoy incredible high-speed wireless network access while not 
having to run cable wires.

RangeBooster technology increases your wireless network's range up to two times, and its throughput by up to 
35%.  Unlike ordinary wireless technologies that are confused by signal reflections, RangeBooster uses two 
smart receivers at each end to detect and decode reflected signals at distances where standard technologies 
give up.  You'll find that "dead spots" in the wireless coverage area are reduced, too.

But what does all of this mean? 

PCs equipped with wireless cards and adapters can communicate without cumbersome cables. By sharing the 
same wireless settings, within their transmission radius, they form a wireless network.

Once you're connected, you can keep in touch with your e-mail, access the Internet, and share files and other 
resources such as printers and network storage with other computers on the network, wherever your work takes 
you, without cables. 

The Advanced security features makes this solution ideal for your business. Advanced wireless security using Wi-
Fi Protected Access™ (WPA2 Enterprise) with up to 256-bit encryption, and the new Wireless Security Monitoring 
functionality gives your business the visibility and protection it needs. When used with a Linksys WAP200, the 
Wireless Security Monitoring alerts you of possible wireless intruders and vulnerabilities in the wireless network 
deployment.

The included Setup Wizard walks you through configuring the Adapter to your wireless network settings, step by 
step. Use the instructions in this Guide to help you set up and connect the Adapter using the Setup Wizard. These 
instructions should be all you need to get the most out of the Adapter.

adapter:

 a device that adds network functionality 

to your PC.

network:

 a series of computers or devices 

connected for the purpose of data sharing, 
storage, and/or transmission between users.

encryption:

 encoding data transmitted in a network

802.11b:

 a wireless networking standard that 

specifies a maximum data transfer rate of 11Mbps 
and an operating frequency of 2.4GHz.

802.11g

: a wireless networking standard that 

specifies a maximum data transfer rate of 54Mbps 
and an operating frequency of 2.4GHz.

Summary of Contents for WMP200

































































































Reviews: