manualshive.com logo in svg

Linksys WAP55AG - Wireless A+G Access Point, User Manual, Page: 35 / 55

Share
Download
Linksys WAP55AG - Wireless A+G Access Point User Manual Download Page 35

29

Chapter 6: Configuring the Dual-Band Wireless A + G Access Point
The Administration Tab - Factory Defaults

Dual-Band Wireless A + G Access Point

The Administration Tab - Factory Defaults

This screen allows you to restore the Access Point’s configuration to its factory default settings.

Factory Defaults

Restore Factory Defaults

. Click this button to reset all configuration settings to their default values. Any settings 

you have saved will be lost when the default settings are restored.

Help information is shown on the right-hand side of the screen.

The Administration Tab - Firmware Upgrade

This screen allows you to upgrade the Access Point’s firmware. Do not upgrade the firmware unless you are 
experiencing problems with the Access Point or the new firmware has a feature you want to use.

Firmware Upgrade

Before upgrading the firmware, download the Access Point’s firmware upgrade file from the Linksys website, 

www.linksys.com

. Then extract the file.

Please select a file to upgrade

. In the field provided, enter the name of the extracted firmware upgrade file, or 

click the 

Browse

 button to find this file.

Start to Upgrade

. After you have selected the appropriate file, click this button, and follow the on-screen 

instructions.

Help information is shown on the right-hand side of the screen.

Figure 6-12: Factory Defaults

Figure 6-13: Firmware Upgrade

firmware: 

the programming code that runs a 

networking device

download: 

to receive a file transmitted over a network

upgrade: 

to replace existing software or firmware with 

a newer version

Note:

 Do not restore the factory defaults unless you are having difficulties with the Access Point and 

have exhausted all other troubleshooting measures. Once the Access Point is reset, you will have to 
re-enter all of your configuration settings.

Summary of Contents for WAP55AG - Wireless A+G Access Point
























































Reviews:

No comments