manualshive.com logo in svg

Linksys WAP55AG - Wireless A+G Access Point, User Manual, Page: 16 / 55

Share
Download
Linksys WAP55AG - Wireless A+G Access Point User Manual Download Page 16

10

Chapter 5: Setting Up the Dual-Band Wireless A + G Access Point
Setup Wizard

Dual-Band Wireless A + G Access Point

4. Connect the other end of the network cable to the Ethernet port on the back of the Access Point.

Click the 

Next

 button to continue, or the 

Back

 button to return to a previous screen.

5. Connect the power adapter to the Access Point’s Power port. Then connect the other end to an electrical 

outlet. Only use the power adapter supplied with the Access Point. Use of a different adapter can cause 
product damage.

Click the 

Next

 button to continue, or the 

Back

 button to return to a previous screen.

6. The Access Point’s LEDs should be lit. If not, re-check the connections.

Click the 

Next

 button to continue or 

Exit

 to exit the Setup Wizard.

Figure 5-4: Connect to the Power

Figure 5-3: Connect to the Ethernet Port

IMPORTANT:

Make sure that you use the power 

adapter that is supplied with the Access Point. 
Use of a different power adapter could damage 
the Access Point.

Figure 5-5: Check the LEDs

Summary of Contents for WAP55AG - Wireless A+G Access Point
























































Reviews:

No comments