manualshive.com logo in svg

Linksys WAP55AG - Wireless A+G Access Point, User Manual, Page: 12 / 55

Share
Download
Linksys WAP55AG - Wireless A+G Access Point User Manual Download Page 12

6

Chapter 3: Getting to Know the Dual-Band Wireless A + G Access Point
The Back Panel

Dual-Band Wireless A + G Access Point

Chapter 3: Getting to Know the Dual-Band Wireless A + G 

Access Point

The Back Panel

The Access Point's ports, where the power cord and network cable are connected, are located on the back panel.

Ethernet

The 

Ethernet 

port connects to Ethernet network devices, such as a switch or router.

Power

The 

Power

 port is where you will connect the power adapter.

Reset Button

There are two ways to Reset the Access Point's factory defaults. Either press the 

Reset 

Button

, for approximately ten seconds, or restore the defaults from the Administration tab in 

the Access Point's Web-Based Utility.

With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys website at 
www.linksys.com for more information about products that work with the Access Point. 

 

Important:

 Resetting the Access Point will 

erase all of your settings (Wireless Security, 

Wireless and LAN settings, etc.) and replace 

them with the factory defaults. Do not reset 

the Access Point if you want to retain these 

settings.

Figure 3-1: The Access Point’s Back Panel

port:

 the connection point on a computer or networking 

device used for plugging in cables or adapters

Summary of Contents for WAP55AG - Wireless A+G Access Point
























































Reviews:

No comments