manualshive.com logo in svg

Linksys WAP55AG - Wireless A+G Access Point, User Manual, Page: 15 / 55

Share
Download
Linksys WAP55AG - Wireless A+G Access Point User Manual Download Page 15

9

Chapter 5: Setting Up the Dual-Band Wireless A + G Access Point
Setup Wizard

Dual-Band Wireless A + G Access Point

Chapter 5: Setting Up the Dual-Band Wireless A + G 

Access Point

Setup Wizard

This Setup Wizard will take you through all the steps necessary to set up and configure the Access Point.

1. Insert the Setup Wizard CD into your PC's CD-ROM drive. Your PC must be on your wired network to set up the 

Access Point.

2. The Setup Wizard's Welcome screen should appear on your monitor. If it does not, this means the Setup 

Wizard is not automatically running as it should. Start the Setup Wizard manually by clicking the 

Start

 button, 

selecting 

Run

, and typing 

d:\setup.exe

 (where "D" is your PC's CD-ROM drive). Click the 

Click Here to Start 

button to continue this Setup Wizard. Clicking the 

User Guide

 button opened this User Guide. To exit this 

Setup Wizard, click the 

Exit

 button.

3. The next screen shows how to start connecting the Access Point. Optimally, you should perform this setup 

through a PC on your wired network. Connect one end of the network cable to your network switch or router.

Click the 

Next

 button to continue or 

Exit

 to exit the Setup Wizard.

 

Figure 5-1: The Setup Wizard’s Welcome Screen

Note:

 The Access Point will be set up in the Setup 

Wizard through a wired network connection. You may 
refer to Chapter 4: Connecting the Dual-Band Wireless 
A + G Access Point. 

Figure 5-2: Connect to the Router

Summary of Contents for WAP55AG - Wireless A+G Access Point
























































Reviews:

No comments