![background image](http://html1.mh-extra.com/html/linksys/wap200/wap200_user-manual_1925189024.webp)
18
Chapter 6: Configuring the Wireless-G Access Point
The Wireless - Basic Wireless Settings Tab
Wireless-G Access Point with Power Over Ethernet and Rangebooster
The Wireless - Basic Wireless Settings Tab
Change the basic wireless network settings on this screen. The Access Point can connect to up to four wireless
networks (SSIDs) at the same time, so this screen offers settings for up to four different SSIDs. Each SSID owns
its own MAC address on this Access Point.
Basic Settings
Configure the Wireless Network basic attributes for the entire system and for each SSID.
Wireless Network Mode
. Select one of the following modes. The default is
Mixed
.
Disable
: To disable wireless connectivity completely. This might be useful during system maintenance.
B-Only
: All the wireless client devices can be connected to the Access Point at Wireless-B data rates with
maximum speed at 11Mbps.
G-Only
: Wireless-G client devices can be connected at Wireless-G data rates with maximum speed at
54Mbps. Wireless-B clients cannot be connected in this mode.
Mixed
: Both Wireless-B and Wireless-G client devices can be connected at their respective data rates.
Wireless-G devices can be connected at Wireless-G data rates.
Wireless Channel
. Select the appropriate channel to be used among your Access Point and your client devices.
The default is channel 6. You can also select
Auto
so that your Access Point will select the channel with the
lowest amount of wireless interference while the system is powering up. Auto channel selection will start when
you click
Save Settings
button, it will take several seconds to scan through all the channels to find the best
channel.
SSID Name
. The SSID is the unique name shared among all devices in a wireless network. It is case-sensitive,
must not exceed 32 alphanumeric characters, and may be any keyboard character. Make sure this setting is the
same for all devices in your wireless network. The default SSID name is
linksys-g
.
SSID Broadcast
. This option allows the SSID to be broadcast on your network. You may want to enable this
function while configuring your network, but make sure that you disable it when you are finished. With this
enabled, someone could easily obtain the SSID information with site survey software or Windows XP and gain
unauthorized access to your network. Click
Enabled
to broadcast the SSID to all wireless devices in range. Click
Disabled
to increase network security and prevent the SSID from being seen on networked PCs. The default is
Enabled
in order to help users configure their network before use.
Figure 6-3: Wireless - Basic Wireless Settings