![background image](http://html1.mh-extra.com/html/linksys/wap200/wap200_user-manual_1925189023.webp)
17
Chapter 6: Configuring the Wireless-G Access Point
The Setup - Time Tab
Wireless-G Access Point with Power Over Ethernet and Rangebooster
•
Subnet Mask
. The Subnet Mask must be the same as that set on the LAN that your Access Point is connected
to. The default is
255.255.255.0
.
•
Default Gateway
. Your ISP will provide you with the Default Gateway Address, which is the ISP server’s IP
address.
•
Primary DNS (Required)
and
Secondary DNS (Optional)
. Your ISP will provide you with at least one DNS
(Domain Name System) Server IP Address.
Select
Automatic Configuration - DHCP
if you have a DHCP server enabled on the LAN that can assign an IP
address to the Access Point.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes. Help information is available on the right side of the screen.
The Setup - Time Tab
This allows you to change the Access Point's time settings. The correct time setting can help the administrator to
search the system log to identify problems.
Time
You can set the time either manually or automatically from a time server if the Access Point can access the public
Internet.
Manually
. Select this option to set the date and time manually. The default is to set the time manually.
Automatically
. Select this option and time zone. The Access Point will contact the public time server to get the
current time.
Automatically adjust clock for daylight saving changes
. Select this option if you are in using the Access Point
in a location that observes daylight saving time.
User Defined NTP Server
. Enable this option if you have set up local NTP server. Default is
Disabled
.
NTP Server IP
. Enter the IP address of user defined NTP Server.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes. Help information is available on the right side of the screen.
Figure 6-2: Setup - Time