![background image](http://html1.mh-extra.com/html/linksys/wap200/wap200_user-manual_1925189044.webp)
38
Chapter 6: Configuring the Wireless-G Access Point
The Administration - Reboot Tab
Wireless-G Access Point with Power Over Ethernet and Rangebooster
3. On the
Firmware Upgrade
screen, enter the location of the firmware upgrade file in the field provided, or click
the
Browse
button to find the file.
4. Click the
Upgrade
button, and follow the on-screen instructions.
Help information is available on the right side of the screen.
The Administration - Reboot Tab
On this screen you can reboot the Access Point.
Reboot
This feature is useful when you need to remotely reboot the Access Point.
Device Reboot
. To reboot the Access Point, click the
Yes
radio button.
Click
Save Settings
to apply your change and the Access Point will reboot itself, or click
Cancel Changes
to
cancel your change. Help information is available on the right side of the screen.
The Administration - Config Management Tab
On this screen you can create a backup configuration file or save a configuration file to the Access Point.
Config Management
Use this screen to upload or download configuration files for the Access Point.
Save Configuration
. To save a backup configuration file on a computer, click the
Save Configuration to File
button and follow the on-screen instructions.
Restore Configuration
. To upload a configuration file to the Access Point, enter the location of the configuration
file in the field provided, or click the
Browse
button to find the file. Then click the
Load
button.
Help information is available on the right side of the screen.
Figure 6-27: Administration - Config Management
Figure 6-26: Administration - Reboot