68
Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
How to Establish a Secure IPSec Tunnel
Wireless-G ADSL Gateway
7. Select the
Tunnel Setting
tab, shown in Figure C-16, and click
The tunnel endpoint is specified by this IP
Address
radio button. Then, enter the Router’s WAN IP Address.
8. Select the
Connection Type
tab, as shown in Figure C-17, and click
All network connections
. Then, click
the
OK
or
Close
button to finish this rule.
Tunnel 2: Router->win
9. In the new policy’s properties screen, shown in Figure C-18, make sure that “win -> Router” is selected and
deselect the
Use
Add Wizard
check box. Then, click the
Add
button to create the second IP filter.
Figure C-16: Tunnel Setting Tab
Figure C-17: Connection Type Tab
Figure C-18: Properties Screen