background image

Pho 10/100 USB Network Adapter

27

Novell NetWare 3.x Client Setup for Windows 98

The instructions below explain how to set up the regular Novell NetWare 3.x
client for use on a Windows 98 PC. 

1. Follow the Windows 98 setup instructions. 

2. Start up Windows 98. Click on StartSettings, then Control Panel.

Double-click on Network. The Network window appears. Click on the
Configuration tab.

3. In the Primary Logon Box, choose Client for NetWare Networks. If you

don’t see this option, refer to page 34 to install this component.

4. Under the The following network components are installed box, highlight

Client for NetWare Networks and click on the Properties button.

5. The Client for NetWare Networks Properties window appears. Under the

General tab, enter the name of your network’s Preferred Server. Assign the
First Network Drive Letter
; the default is F. Make sure the Enable logon
script processing is checked. 

6. Click OK. Click on the Access Control tab. Make sure the Share-level

access control option is selected; do not select User-level access control.

7. When you’re done, click OK to restart your computer. 

The NetWare Client portion of your Windows setup is complete.

usb100h1 April 2000.qxd  4/4/00  11:17 AM  Page 27

Summary of Contents for USB100H1













































Reviews: