![background image](http://html1.mh-extra.com/html/linksys/srw224p-10-100-gigabit-switch/srw224p-10-100-gigabit-switch_user-manual_1925170034.webp)
28
Chapter 6: Configuring the Wireless-N Access Point
The Administration - Management Tab
Wireless-N Access Point with Power Over Ethernet
The Administration - Management Tab
On this screen you can configure the password, Web Access, and SNMP settings.
Management
You should change the username/password that controls access to the Access Point’s Web-based Utility to
prevent unauthorized access.
Local AP Password
User Name
. Modify the administrator user name. The default is
admin
.
AP Password
. Modify the administrator password for the Access Point’s Web-based Utility. The default is
admin
.
Re-enter to confirm
. To confirm the new password, enter it again in this field.
Web Access
To increase the security on accessing the Web-based Utility, you can enable HTTPS. Once enabled, users need to
use
https://
when accessing the Web-based Utility.
Web HTTPS Access
. The default is
Disabled
.
Wireless Web Access
. Allow or deny wireless clients to access Web based Utility. The default is
Enabled
.
SNMP
SNMP is a popular network monitoring and management protocol. It provides network administrators with the
ability to monitor the status of the Access Point and receive notification of any critical events as they occur on the
Access Point.
To enable the SNMP support feature, select
Enabled
. Otherwise, select
Disabled
. The default is
Disabled
.
Figure 6-18: Administration - Management
Summary of Contents for SRW224P - 10/100 - Gigabit Switch
Page 65: ...59 Appendix H Regulatory Information Wireless N Access Point with Power Over Ethernet ...
Page 66: ...60 Appendix H Regulatory Information Wireless N Access Point with Power Over Ethernet ...
Page 67: ...61 Appendix H Regulatory Information Wireless N Access Point with Power Over Ethernet ...