Linksys RV0041 - 10/100/1000 VPN Router User Manual Download Page 90

Page: 90 / 99

Appendix E: Upgrading Firmware

10/100/1000 4-Port VPN Router

Appendix E: Upgrading Firmware

You can use the Router’s Web-based Utility to upgrade the firmware; however, if you do so, you may lose the
settings you have configured on the Router.

To upgrade the Router’s firmware, follow these instructions:

1. Download the Router’s firmware upgrade file from the Linksys website,

www.linksys.com

or click the

Firmware Download from Linksys Web Site

button. Select the Router from the pull-down menu and

choose the firmware from the options.

2. Extract the file on your computer.

3. Click the

System Management Tab

and then the

Firmware Upgrade

page.

4. On the Firmware Upgrade screen, enter the location of the extracted firmware upgrade file, or click the

Browse

button to find this file.

5. Click the

Firmware

Upgrade Right Now

button, and follow the on-screen instructions.

Figure E-1: Upgrade Firmware

Summary of Contents for RV0041 - 10/100/1000 VPN Router




































































































Search results

Summary of Contents for RV0041 - 10/100/1000 VPN Router

Reviews:

Related manuals for RV0041 - 10/100/1000 VPN Router

Brands by name

Popular brands

Linksys RV0041 - 10/100/1000 VPN Router, User Manual

Search results

Summary of Contents for RV0041 - 10/100/1000 VPN Router

Reviews:

Related manuals for RV0041 - 10/100/1000 VPN Router

Brands by name

Popular brands