![background image](http://html.mh-extra.com/html/linksys/lapac1750pro/lapac1750pro_user-manual_1925218010.webp)
Section 2: Viewing Access Point System Status
LAPAC1750PRO Access Point Software User Manual
8
MAC Address
Shows the MAC address of the AP The address
shown here is the MAC address associated with the
management interface This is the address by which
the AP is known externally to other networks
Firmware Version
Shows version information about the firmware
currently installed on the AP As new versions of
the WLAN AP firmware become available, you can
upgrade the firmware on your AP
Hardware Version
Identifies the AP hardware version
System Uptime
Provides information about the system start up time
Power Source
The power source of monitor system is the power
adapter or PoE
Connecting to the AP Web Interface
Using the IPv6 Address
To connect to the AP by using the IPv6 global address or IPv6 Link Local address,
you must enter the AP address into your browser in a special format
NOTE:
The following instructions and examples work with Microsoft Internet
Explorer 7 (IE7) and might not work with other browsers
To connect to an IPv6 global address, add square brackets around the IPv6
address For example, if the AP global IPv6 address is 2520::230:abff:fe00:2420,
type the following address into the IE7 address field:
http://[2520::230:abff:fe00:2420]
To connect to the iPv6 Link Local address, replace the colons (:) with hyphens
(-), add the interface number, preceded by an “s,” then add “ ipv6-literal net ”
For example, if the AP Link Local address is fe80::230:abff:fe00:2420, and the
Windows interface is defined as “%6,” type the following address into the IE7
address field:
http://fe80--230-abff-fe00-2420s6 ipv6-literal net
Network Interfaces
This page displays the current settings for the wired Ethernet interface and the
wireless radio interfaces on the AP
To monitor Ethernet LAN (wired) and wireless LAN (WLAN) settings, click the
System Status > Status and Statistics > Network Interfaces tab
Figure 3: Viewing Network Interfaces
NOTE:
The information on this page is read-only To change the wired or wireless
interface settings, click the Edit link associated with the appropriate
section
Summary of Contents for LAPAC1750PRO
Page 1: ...LAPAC1750PRO User Guide ...