![background image](http://html1.mh-extra.com/html/linksys/etherfast-instant-broadband-befw11s4/etherfast-instant-broadband-befw11s4_fast-start-manual_1924628007.webp)
The following instructions assume you are run-
ning Windows XP’s default interface. If you are
using the Classic interface (where the icons
and menus look like previous Windows ver-
sions), please follow the instructions for
Windows 2000.
A.
Click the
Start
button, open the
Control
Panel
. and click the
Network and Internet
Connections
icon. Then, click the
Network
Connections
icon to display the Network
screen.
B.
Select the
Local Area Connection
icon for
the applicable Ethernet adapter (usually it
is the first Local Area Connection listed).
Double-click
Local Area Connection
.
C.
When the Local Area Connection Status
screen appears, click the
Properties
but-
ton.
D.
Select
Internet Protocol (TCP/IP)
and
click the
Properties
button.
E.
Select
Obtain an IP address automati-
cally
and click the
OK
button on the subse-
quent screens to complete the PC’s config-
uration.
F.
Restart your computer.
A.
Click the
Start
button, click
Settings
and
open the
Control Panel
. From there, dou-
ble-click the
Network and Dial-up
Connections
icon. This will display the
Network screen.
B.
Select the
Local Area Connection
icon for
the applicable Ethernet adapter* (usually it
is the first Local Area Connection listed).
Double-click
Local Area Connection
.
C.
When the Local Area Connection Status
screen appears, click the
Properties
but-
ton.
D.
Select
Internet Protocol (TCP/IP)
and
click the
Properties
button.
E.
Select
Obtain an IP address automatical-
ly
and click the
OK
button on the subse-
quent screens to complete the PC’s config-
uration.
F.
Restart your computer.
*Note: Do not choose a TCP/IP entry whose
name mentions DUN, PPPoE, VPN, or AOL.
10
11
Instant Wireless™ Series
Wireless Access Point Router with 4-Port Switch
If you are running:
Windows 2000
E
D
C
If you are running:
Windows XP
C
D
E