Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router User Manual Download Page 48

Page: 48 / 89

Chapter 5: Using The Router’s Web-based Utility
The Administration Tab

Broadband Firewall Router with 4-Port Switch/VPN Endpoint

Factory Defaults

The

Factory Defaults

screen allows you to restore the Router’s configuration to its factory default settings.

Restore Factory Defaults. To clear all of the Router’s settings and reset them to its factory defaults, click the

Yes

radio button.

When finished making your changes on this tab, click the

Save Settings

button to save these changes, or click

the

Cancel

Changes

button to undo your changes.

Firmware Upgrade

The

Firmware Upgrade

screen allows you to upgrade the Router’s firmware.

Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website,

www.linksys.com

. Then extract the file.

File Path

. In the field provided, enter the name of the extracted firmware upgrade file, or click the

Browse

button

to find this file.

Upgrade

. After you have selected the appropriate file, click the

Upgrade

button (located at the bottom of the

screen), and follow the on-screen instructions.

Figure 5-36: Administration Tab - Factory Defaults

Figure 5-37: Administration Tab - Firmware Upgrade

Note:

If you upgrade the Router’s firmware, you may lose its configuration settings.

Note:

Do not restore the factory defaults unless you are having difficulties

with the Router and have exhausted all other troubleshooting measures. Once
the Router is reset, you will have to re-enter all of your configuration settings.

Summary of Contents for BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router


























































































Search results

Summary of Contents for BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router

Reviews:

Related manuals for BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router

Brands by name

Popular brands

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router, User Manual

Search results

Summary of Contents for BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router

Reviews:

Related manuals for BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router

Brands by name

Popular brands