Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router User Manual Download Page 34 | Manualshive

Page: 34 / 89

background image

27

Chapter 5: Using The Router’s Web-based Utility
The Security Tab

Broadband Firewall Router with 4-Port Switch/VPN Endpoint

The Router creates a tunnel or channel between two endpoints, so that the data or information between these
endpoints is secure. To establish this tunnel, select the tunnel you wish to create in the Select Tunnel Entry
drop-down box. It is possible to create up to

two

simultaneous tunnels. To delete a tunnel, click the

Delete

button. To view a summary of that tunnel, click the

Summary

button.

Then check the box next to

Enable

to enable the tunnel.

Once the tunnel is enabled, enter the name of the tunnel in the

Tunnel Name

field. This is to allow you to

identify multiple tunnels and does not have to match the name used at the other end of the tunnel.

Local Secure Group and Remote Secure Group

A Local Secure Group is a computer(s) on your network that can access the tunnel. A Remote Secure Group is a
computer (s) on the remote end of the tunnel that can access the tunnel. Under Local Secure Group and Remote
Secure Group, you may choose one of three options: Subnet, IP Address, and IP Range. Under Remote Secure
Group, you have two additional options: Host and Any.

Subnet

. If you select Subnet (which is also the default), this will allow all computers on the local subnet to

access the tunnel. When using the Subnet setting, the default values of 0 should remain in the last fields of
the IP and Mask settings.

IP Address

. If you select IP Address, only the computer with the specific IP Address that you enter will be

able to access the tunnel.

IP Range

. If you select IP Range, it will be a combination of Subnet and IP Address. You can specify a range

of IP Addresses within the Subnet which will have access to the tunnel.

The next to options are for Remote Secure Groups only.

Host

. If you select Host for the Remote Secure Group, then the Remote Secure Group will be the same as the

Remote Security Gateway setting: IP Address, FQDN (Fully Qualified Domain Name), or Any.

Any

. If you select Any for the Remote Security Group, the local VPN Router will accept a request from any IP

address. This setting should be chosen when the other endpoint is using DHCP or PPPoE on the Internet side.

Remote Security Gateway

The Remote Security Gateway is the VPN device, such as a second VPN Router, on the remote end of the VPN
tunnel. Under Remote Security Gateway, you have three options: IP Address, FQDN, and Any. In this section, you
can also set the levels and types of encryption and authentication.

Figure 5-20: Local and Remote Secure Group

Figure 5-19: VPN Tunnel

«
...
32
33
34
35
36
...
»

Summary of Contents for BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router


























































































Reviews:

No comments

Related manuals for BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall Router

Brand: ICP DAS USA Pages: 8

Brand: Q-See Pages: 2

Brand: Lanner Pages: 109

Brand: Garderos Pages: 23

Brand: Patton electronics Pages: 12

Net2Air Ins-40085-US

Brand: Paxton Pages: 4

Brand: ZyXEL Communications Pages: 215

TRAK 2OP M11 Mill

Brand: XYZ Machine Tools Pages: 203

8677 - BladeCenter Rack-mountable - Power Supply

Brand: IBM Pages: 126

Brand: TP-Link Pages: 176

Hotwire 8775 MSDSL

Brand: Paradyne Pages: 10

Brand: Quatech Pages: 98

Brand: DPS Telecom Pages: 80

Brand: N-Tron Pages: 2

FrameSaver DSL 9783 CSU/DSU

Brand: Paradyne Pages: 233

Brand: Addi-Data Pages: 20

Brand: Ryobi Pages: 84

Brand: RadioLabs Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands