Linksys BEFSR81 - EtherFast Cable/DSL Router Page 16 User Manual Download | Manualshive

Page: 16 / 72

background image

10

Chapter 5: Configuring the PCs
Overview

EtherFast Cable/DSL Router with 8-Port Switch

Chapter 5: Configuring the PCs

Overview

The instructions in this chapter will help you configure each of your computers so they will be able to
communicate with the Router. Each PC must be set to obtain an IP address (or TCP/IP) address automatically
(called DHCP). Computers use IP addresses to communicate with each other across a network or the Internet.

Find out which operating system your computer is running, such as Windows 98, Millennium, 2000, or XP. If
you’re not sure, you can find out by clicking the Start button. On the left side of the taskbar, it will say which
operating system your computer is using.

You may need to do this for each computer you are connecting to the Router.

The next few pages tell you, step by step, how to configure your network settings based on the type of Windows
operating system you are using. Make sure that an Ethernet card or adapter has been successfully installed in
each PC you will configure. Once you’ve configured your computers, proceed to “Chapter 6: Configuring the
Router.”

Configuring Windows 98 and Millennium PCs

1. Click the

Start

button. Click

Settings

and then

Control Panel

. From there, double-click the

Network

icon.

2. On the Configuration tab, select the

TCP/IP

line for the applicable Ethernet adapter, as shown in Figure 5-1.

Do not choose a TCP/IP entry whose name mentions Dial-Up Adapter, PPPoE, VPN, or AOL. If the word TCP/IP
appears by itself, select that line. (If there is no TCP/IP line listed, refer to Windows Help or your Ethernet
adapter’s documentation to install TCP/IP now.) Click the

Properties

button.

3. Click the

IP Address

tab and select

Obtain an IP address automatically

, as shown in Figure 5-2.

4. Now click the

Gateway

tab to ensure that the

Installed Gateway

field is left blank. Click the

OK

button.

Figure 5-1: TCP/IP for Windows 98

and Me

Note:

These instructions apply only to Windows 98, Millennium, 2000, or XP computers. By default,

Windows 98, 2000, Millennium, and XP have TCP/IP installed and are set to obtain an IP address
automatically. If you have not made any changes to your PC’s default network settings, then proceed
to “Chapter 6: Configuring the Router.”

Figure 5-2: Obtain an IP address

automatically for Windows 98

and Me

«
...
14
15
16
17
18
...
»

Summary of Contents for BEFSR81 - EtherFast Cable/DSL Router









































































Reviews:

No comments

Related manuals for BEFSR81 - EtherFast Cable/DSL Router

All in One Printer

Brand: Baracoda Pages: 42

ZyXEL EES-1024AF

Brand: ZyXEL Communications Pages: 99

LinkSmart KW6515

Brand: Kasda Pages: 31

InvenSense RoboKit1

Brand: TDK Pages: 13

Brand: 3Com Pages: 32

Brand: Aethra Pages: 2

Brand: Z-Com Pages: 18

Brand: Dataprobe Pages: 16

Ethernet MCA 10/100 Adapter

Brand: Olicom Pages: 88

DVI-Vision-IP-Fiber

Brand: G&D Pages: 240

Brand: Amphenol Pages: 43

Brand: Proxim Pages: 45

Wireless Kit 108MBPS

Brand: Topcom Pages: 100

Brand: Aztech Pages: 13

Brand: COMBA Pages: 57

Brand: U-Media Pages: 42

Brand: NetComm Pages: 2

Brand: Kraun Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands