Linksys BEFSR81 - EtherFast Cable/DSL Router Page 52 User Manual Download | Manualshive

Page: 52 / 72

background image

46

Appendix A: Troubleshooting
Common Problems and Solutions

EtherFast Cable/DSL Router with 8-Port Switch

9. I forgot my password, or the password prompt always appears when saving settings to the Router.

Reset the Router to factory default by pressing the Reset button for 30 seconds and then releasing it. If you
are still getting prompted for a password when saving settings, then perform the following steps:

A. Access the Router’s web interface by going to

http://192.168.1.1

or the IP address of the Router. Enter

the default password admin, and click the

Administration

=>

Management

tab.

B. Enter a different password in the

Router Password

field, and enter the same password in the second field

to confirm the password.

C. Click the

Save Settings

button.

10. I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.

If you have proxy settings, you need to disable these on your computer. Because the Router is the gateway for
the Internet connection, the computer does not need any proxy settings to gain access. Please follow these
directions to verify that you do not have any proxy settings and that the browser you use is set to connect
directly to the LAN.

For Microsoft Internet Explorer 5.0 or higher:

A. Click

Start

,

Settings

, and

Control Panel

. Double-click

Internet Options

.

B. Click the

Connections

tab.

C. Click the

LAN settings

button and remove anything that is checked.

D. Click the

OK

button to go back to the previous screen.

E. Click the option

Never dial a connection

. This will remove any dial-up pop-ups for PPPoE users.

For Netscape 4.7 or higher:

A. Start

Netscape Navigator

, and click

Edit

,

Preferences

,

Advanced

, and

Proxies

.

B. Make sure you have

Direct connection to the Internet

selected on this screen.

C. Close all the windows to finish.

11. To start over, I need to set the Router to factory default.

Hold the Reset button for up to 30 seconds and then release it. This will return the password, forwarding, and
other settings on the Router to the factory default settings. In other words, the Router will revert to its original
factory configuration.

12. I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download
the latest firmware at

www.linksys.com

. Follow these steps:

A. Go to the Linksys website at

http://www.linksys.com

and download the latest firmware.

«
...
50
51
52
53
54
...
»

Summary of Contents for BEFSR81 - EtherFast Cable/DSL Router









































































Reviews:

No comments

Related manuals for BEFSR81 - EtherFast Cable/DSL Router

OfficeConnect 1600

Brand: 3Com Pages: 8

Brand: 3Com Pages: 8

Brand: Ubiquiti Pages: 23

Brand: Conceptronic Pages: 230

Brand: TRENDnet Pages: 2

Brand: XNET Pages: 17

LinkStation Mini

Brand: Buffalo Pages: 71

JetFusion 2100 Series

Brand: Paradyne Pages: 296

ReadyNAS 3220 Series

Brand: NETGEAR Pages: 4

Brand: FiberHome Pages: 2

Wisenet XRN-6410DB4

Brand: Hanwha Techwin Pages: 118

Brand: Williams Sound Pages: 2

Brand: EINHELL Pages: 32

Brand: National Instruments Pages: 36

Brand: E-TOP Pages: 90

Brand: IOGear Pages: 8

Brand: Billion Pages: 121

Brand: RadioLAN Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands