manualshive.com logo in svg

Linksys BEFSR81 - EtherFast Cable/DSL Router, User Manual, Page: 12 / 72

Share
Download
Linksys BEFSR81 - EtherFast Cable/DSL Router User Manual Download Page 12

6

Chapter 3: Getting to Know the Router
The Back Panel

EtherFast Cable/DSL Router with 8-Port Switch

Chapter 3: Getting to Know the Router

The Back Panel

The Router’s ports and the Reset button are located on the back panel of the Router.

Internet

This 

Internet

 port connects to your cable or DSL modem.

1-8

These eight 

Ethernet

 ports connect to network devices, such as PCs, print servers, or 

additional switches.

Reset Button

The Reset button can be used in one of two ways:
If the Router is having problems connecting to the Internet, press the Reset button for just a 
second with a paper clip or a pencil tip. This is similar to pressing the Reset button on your PC 
to reboot it.

If you are experiencing extreme problems with the Router and have tried all other 
troubleshooting measures, press and hold in the Reset button for 30 seconds. This will restore 
the factory defaults and clear all of the Router’s settings, such as port forwarding or a new 
password.

Power

The 

Power

 port is where you will connect the power adapter.

 

Figure 3-1: Back Panel

Summary of Contents for BEFSR81 - EtherFast Cable/DSL Router









































































Reviews:

No comments