35
Chapter 5: Configuring the Gateway
The Administration Tab
ADSL2 Gateway with 4-Port Switch
Factory Defaults
Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your
settings, click
Yes
.
To begin the restore process, click the
Save Settings
button to save these changes, or click the
Cancel
Changes
button to undo your changes.
Firmware Upgrade
The ADSL Gateway allows you to upgrade firmware for the LAN (network) side of the Gateway.
Upgrade from LAN
To upgrade the Gateway’s firmware from the LAN:
1. Click the
Browse
button to find the firmware upgrade file that you downloaded from the Linksys website and
then extracted.
2. Double-click the firmware file you downloaded and extracted. Click the
Upgrade
button, and follow the
instructions there.
Figure 5-34: Factory Defaults
Figure 5-35: Firmware Upgrade
