7
Introduction
Thank you for purchasing a Linkam system. Please take
the time to read through all the manuals, as it will help
you to fully understand the equipment.
Please check you have received the following items:-
1: CSS450 System Controller
2: Power cord
3: RS232 cable for PC connection
4: USB Type A to B cable
5: Manual
6&7: Optional LinkPad and Stylus
Before using your Equipment
Please register your products by going
to
www.linkam.co.uk
and clicking on the product/software registration
button. You will need to register your equipment with us to:
Activate your warranty and technical support.
Access the online setup videos.
Permanently unlock the Linksys32 software by use of a product key (if purchased).
To unlock the Linksys32 software a product key must be requested which is supplied by Linkam from a
customers product registration number. This is generated after installing the Linksys32 software by running the
register program from Start-Programs-Linkam-Register. See the Linksys32 manual for further installation
instructions.
Warranty
This equipment has a warranty against defects in material and workmanship for a period of 12 months. Linkam
will either repair or replace products that prove to be defective. For warranty service or repair, this product must
be returned to Linkam or a designated service facility.
The warranty shall not apply to defects resulting from interfacing, unauthorized modification or misuse, opera-
tion outside of the environmental specifications for the product, or improper site preparation or
maintenance.
Technical Support
Any technical questions or queries should be emailed to the Technical Support Department at
support
@linkam.co.uk
Feedback
Your feedback will be greatly appreciated, please go to
www.linkam.co.uk
to fill in the feedback form.
Equipment Operation
Warning:
Do not connect or remove any leads to the CSS450 Controller while the unit is switched on at the mains
supply. All connections must be in place before the CSS450 Shear Controller is switched on.
If an LNP95 unit is being used it is important that it is switched on before the CSS450 unit, otherwise the
equipment will not function correctly.
2
1
7
6
