22
CSS450 Tool Bar
The CSS450
toolbar is made up of control but-
tons, sensor indicators and status window.
When the tool bar shows this button, then
the ‘Jog Controls’ will be active. ‘Gap’
setting and ‘velocity’ are controlled manu-
ally by typing a value. Click to toggle be-
tween ‘Jog’ and ‘Motor Profile’ controls.
When the tool bar shows this button, then
the ‘Shear Motor Profile’ table will be
active and shearing functions will be
controlled by
the values in the profile table.
Click to tog- gle between ‘Jog’ and ‘Motor Pro-
file’.
This button controls the direction of
steady shear (clockwise or anti clockwise)
when the ‘Jog Controls’ are active.
This button
Starts
the CSS450 motors
according to setting in either ‘Shear Motor
Profile’ or the ‘Jog Controls’
This button
Stops
the CSS450 motors
according to setting in either ‘Shear Motor
Profile’ or the ‘Jog Controls’.
This button moves the lid to the reference
point (windows separated by 2500mm).
CSS Status Window
This shows the current status of the CSS450 e.g.
the status message ‘The gap motor might need to
be referenced’ is shown when the CSS450 is first
connected.
Sensor Indicators
There are three sensors in the Lid of the CSS450,
marked with the letters L, R and Z. L represents
the Lid sensor, it is lit green when the Lid is in
place. R represents the Reference sensor and is lit
green when the Lid is at 2500mm. Z represents
the Zero Sensor and is lit green when the Lid is at
0mm. T/B shows which heater is being used to
display the temperature. ‘Green’ colour repre-
sents the Base heater and ‘Red’ colour represents
Top heater.
Jog Controls (Manual Mode)
When the Jog control button is displayed the user
can set the gap size by typing any number be-
tween 0 to 2500mm into the Gap setting box. To
set rotary velocity, type a value between 1 and 10
rad/s or drag the slider using the PC mouse.
Linksys32:
CSS450 Tool Bar
