5
Safety Precautions
1)
Read this guide before using the equipment. Save these instructions for later use.
2)
Follow all warnings and instructions which may be placed on the programmer or stage.
3)
If for any reason the mains fuse needs to be replaced then it must be replaced by one of the same
type and rating as shown in the equipment ratings.
4)
To prevent electric shock, do not remove the cover of the controller or associated electronics.
5)
Never use the equipment if a power cable has been damaged. Do not allow any heavy objects to
rest on the power cables. Never lay the power cables on the floor.
6)
Do not obstruct any ventilation holes. Do not attempt to insert anything into these openings.
Provide adequate ventilation of at least 75mm all around the equipment.
7)
Do not expose the equipment to water. If for any reason it gets wet then unplug it from the mains
and contact Linkam Scientific Technical Support.
8)
The equipment is not intended to be used outdoors
.
9)
Each product is equipped with a 3-wire grounded (earth) mains plug or a free-end 3 wire
mains lead. The plug only fits into a grounded-type outlet. The free-end mains lead should be
connected to a correctly grounded 3-wire mains outlet. Do not defeat the purpose of the grounded
(earth) type plug.
Free - end mains leads are colour coded as follows :
Colour
Function
Brown
Live
Blue
Neutral
Green/Yellow
Earth (Ground)
10)
If any problems occur then unplug the equipment from the mains outlet and contact Linkam Sci-
entific Technical Support.
11)
Do not remove the cover from the equipment unless the mains inlet has been removed. Any
servicing should be carried out by qualified service personnel.
Symbol Reference
Caution:
This safety symbol is on the back panel of the equipment and warns:-
The user must not make or remove any connections while the unit is powered on.
To avoid electric shock do not remove the cover. Refer servicing to qualified service personnel.
Caution:
This warning symbol indicates that the surface labelled with this symbol may be hot.
Feedback:
Your feedback will be greatly appreciated, please go to
