Installation Guide
14 18-HD95D1-1C-EN
10. SC360 Notices
TSYS2C60A2VVU
FCC Notice
Contains Transmitter Module FCC ID: MCQ-CCIMX6UL
Contains Transmitter Module FCC ID: D87-ZM5304-U
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. The antenna(s) used for this
transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must
not be collocated or operating in conjunction with any
other antenna or transmitter.
This equipment has been tested and found to comply
with the limits for Class B Digital Device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures.
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment
and receiver
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV
technician for help
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
IC Notice
Contains Transmitter Module IC ID: 1846A-CCIMX6UL
Contains Transmitter Module IC ID: 11263A-ZM5304
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Le present appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de license. L’exploitation est autorisée
aux deux conditions suivantes: (1) l’appareil de doit
pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
