Wireless N300 Home Router
61
4.
Start IP/End IP
: Enter the same IP address, say, 110, or 2 different IP
addresses, say, 110 and 120 in both boxes to specify a single PC or a
range of PCs for the current rule to apply to.
5.
Port
: Specify TCP/UDP protocol port number (s), say, 80.
6.
Type (or Protocol)
: Select Both.
7.
Time
: Specify a time period for a current rule to take effect. If the field is
set to 0:00-0:00, the rule will be applied 24hrs/day.
8.
Day(s)
: Specify a day or several days for a current rule to take effect.
9.
Enable
: Check/uncheck to enable/disable the feature.
10.
OK
: Click to activate your settings.
For example:
If you want to prohibit PCs within the IP address range of
192.168.0.100--192.168.0.120 from accessing Internet, do as follows:
1.
Filter Mode:
Select Forbid Only.
2.
Access Policy:
Select an access policy number, say, 1, from the
drop-down list.
3.
Policy Name:
Briefly describe the current rule, say, 123.
4.
Start IP:
Enter 100.
