Wireless N300 Home Router
43
Note:
1. To use the WPS security, the wireless client must be also WPS-capable.
2. Before you press the hardware WPS button on the device for WPS/PBC
connection, making sure the WPS feature has been enabled on the
device.
4.3 Wireless Access Control
The Access Control feature allows you to specify a list of devices to Permit
(Allow) or Forbid (Deny) a connection to your wireless network via the
devices’ MAC addresses. All other devices not listed as Permitted will be
Forbidden and vice versa.
1. Select the wireless network (SSID) you wish to enable Access Control
on.
2.
MAC Address Filter
: Select
Permit
or
Forbid
from the drop-down list.
3. To permit a wireless device to connect to your wireless network, select
Permit (or Allow), enter its MAC address, click
Add
and then
OK
. Then
only this device listed as “Permitted” will be able to connect to your
wireless network; all other wireless devices will be forbidden.
Step1. Select the wireless network (SSID) you wish to enable Access Control
on.
Step2. Select
Permit
(or
Allow
) from the corresponding drop-down menu.
Step3. Enter the MAC address you wish to permit in the MAC address box
and click
Add
.
Step4. Click
OK
to save your settings. You can add more wireless MAC
addresses you wish to allow.
